Effects of alumina phases on CO2 sorption and regeneration properties of potassium-based alumina sorbents

A range of potassium-based alumina sorbents were fabricated by impregnation of alumina with K₂CO₃ to examine the effects of the structural and textural properties of alumina on the CO₂ sorption and regeneration properties. Alumina materials, which were used as supports, were prepared by calcining alumina at various temperatures (300, 600, 950, and 1,200 °C). The CO₂ sorption and regeneration properties of these sorbents were examined during multiple tests in a fixed-bed reactor in the presence of 1 vol% CO₂ and 9 vol% H₂O. The regeneration capacities of the potassium-based alumina sorbents increased with increasing calcination temperature of alumina. The formation of KHCO₃ increased with increasing calcination temperature during CO₂ sorption, whereas the formation of KAl(CO₃)(OH)₂, which is an inactive material, decreased. These results is due to the fact that the structure of alumina by the calcination temperature is related directly to the formation of the by-product [KAl(CO₃)(OH)₂]. The structure of alumina plays an important role in enhancing the regeneration capacity of the potassium-based alumina sorbent. Based on these results, a new potassium-based sorbent using δ-Al₂O₃ as a support was developed for post-combustion CO₂ capture. This sorbent maintained a high CO₂ capture capacity of 88 mg CO₂/g sorbent after two cycles. In particular, it showed a faster sorption rate than the other potassium-based alumina sorbents examined.     

Facile Access to cis‐2,6‐Disubstituted Tetrahydropyrans by Palladium‐Catalyzed Decarboxylative Allylation: Total Syntheses of (±)‐Centrolobine and (+)‐Decytospolides A and B

cis‐2,6‐Tetrahydropyran is an important structural skeleton of bioactive natural products. A facile synthesis of cis‐2,6‐disubstituted‐3,6‐dihydropyrans as cis‐2,6‐tetrahydropyran precursors has been achieved in high regio‐ and stereoselectivity with high yields. This reaction involves a palladium‐catalyzed decarboxylative allylation of various 3,4‐dihydro‐2H‐pyran substrates. Extending this reaction to 1,2‐unsaturated carbohydrates allowed the achievement of challenging β‐C‐glycosylation. Based on this methodology, the total syntheses of (±)‐centrolobine and (+)‐decytospolides A and B were achieved in concise steps and overall high yields.     

A Phosphine‐Catalyzed Novel Asymmetric [3+2] Cycloaddition of C,N‐Cyclic Azomethine Imines with δ‐Substituted Allenoates

Catalytic asymmetric [3+2] cycloadditions of C,N‐cyclic azomethine imines with δ‐substituted allenoates have been developed in the presence of (S)‐Me‐f‐KetalPhos, affording functionalized tetrahydroquinoline frameworks in good yields with high diastereo‐ and good enantioselectivities under mild condition. The substrate scope has been also examined. This is the first time that δ‐substituted allenoates have been applied as a δ,γ‐C?C bond participated C₂ synthon in asymmetric synthesis.     

Cube‐in‐Cube Hollow Cu9S5 Nanostructures with Enhanced Photocatalytic Activities in Solar H2 Evolution

Hydrogen produced from water under solar energy is an ideal clean energy source, and the efficiency of hydrogen production usually depends on the catalytic systems based on new compounds and/or a unique nanostructure. Herein, well‐defined cube‐in‐cube hollow Cu₉S₅ nanostructures have been successfully prepared with Cu₂O nanocubes and CS₂ as precursors, and single‐shell hollow Cu₉S₅ nanocubes could be obtained by replacing CS₂ with Na₂S. The formation mechanism of cube‐in‐cube hollow nanostructures has been proposed based on the Kirkendell effect and an outward self‐assembly process. Further studies revealed that the cube‐in‐cube hollow Cu₉S₅ nanostructures exhibited better photocatalytic activity toward solar H₂ evolution and would be a promising photocatalyst in the solar hydrogen industry.     

Cross‐Conjugated Hexaphyrins and Their Bis‐Rhodium Complexes

A cross‐conjugated hexaphyrin that carries two meso‐oxacyclohexadienylidenyl (OCH) groups 9 was synthesized from the condensation of 5,10‐bis(pentafluorophenyl)tripyrrane with 3,5‐di‐tert‐butyl‐4‐hydroxybenzaldehyde. The reduction of 9 with NaBH₄ afforded the Möbius aromatic [28]hexaphyrin 10 . Bis‐rhodium complex 11 , prepared from the reaction of 10 with [{RhCl(CO)₂}₂], displays strong Hückel antiaromatic character because of the 28 π electrons that occupy the conjugated circuit on the enforced planar structure. The oxidation of 11 with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) yielded complexes 12 and 13 depending upon the reaction conditions. Both 12 and 13 are planar owing to bis‐rhodium metalation. Although complex 12 bears two meso‐OCH groups at the long sides and is quinonoidal and nonaromatic in nature, complex 13 bears 3,5‐di‐tert‐butyl‐4‐hydroxyphenyl and OCH groups and exhibits a moderate diatropic ring current despite its cross‐conjugated electronic circuit. The diatropic ring current increases upon increasing the solvent polarity, most likely due to an increased contribution of an aromatic zwitterionic resonance hybrid.     

Highly Curved Bowl‐Shaped Fragments of Fullerenes: Synthesis,Structural Analysis,and Physical Properties

Highly curved buckybowls 3 , 4 , and 5 were synthesized from planar precursors, fluoranthenes 8 , benzo[k]fluoranthenes 10 and naphtho[1,2‐k]‐cyclopenta[cd]fluoranthenes 12 , respectively, using straightforward palladium‐catalyzed cyclization reactions. These fluoranthene‐based starting materials were easily prepared from 1,8‐bis(arylethynyl)naphthalenes 6 . Both buckybowls 3 and 4 are fragments of C₆₀, whereas 5 is a unique subunit of C₇₀. The curved structures were identified by X‐ray crystallography, and they are deep bowls. The maximum π‐orbital axis vector (POAV) pyramidalization angle in both 3 and 4 is 12.8°. Such a high curvature is very rarely obtained. Buckybowls 5 are less curved than the others because they have a lower density of five‐membered rings, analogous to the tube portion of C₇₀. Cyclopentaannulation increases the bowl depths of 3 and 4 , but not the maximum POAV pyramidalization angle. Among the eight buckybowls studied herein, five form polar crystals. The bowl‐to‐bowl inversion dynamics of these buckybowls can be classified into two types; one has a planar transition structure, whereas the other has an S‐shaped transition structure. A larger longitudinal length of these buckybowls corresponds to a stronger preference for the latter. The photophysical properties of these buckybowls were examined and compared with those of C₆₀ and C₇₀. Buckybowls 5 have absorption bands at wavelengths greater than 450 nm, which are similar to those of C₇₀. The chiral resolution of the mono‐substituted buckybowl 4 ac was also studied by using HPLC with a chiral column.     

Highly Enantioselective Catalytic System for Asymmetric Copolymerization of Carbon Dioxide and Cyclohexene Oxide

A new ligand can be easily prepared, and its intramolecular dinuclear zinc complexes act as a high performance catalyst for the asymmetric alternating copolymerization of cyclohexene oxide and CO₂ under very mild conditions (1 atm CO₂, room temperature), affording completely alternating polycarbonates with up to 93.8 % enantiomeric excess (ee) and 98 % yield. A high M_n value of 28 600 and a relatively narrow polydispersity (M_w/M_n ratio) of 1.43 were also achieved.     

Gold‐Catalyzed Cycloisomerization of Yne‐Vinylidenecyclopropanes: A Three‐Carbon Synthon for [3+2] Cycloadditions

A novel type of yne‐vinylidenecyclopropanes (VDCPs) has been synthesized and applied in gold‐catalyzed cycloisomerization reactions. It was found that these compounds can undergo an intramolecular cycloisomerization and perform as a three‐carbon synthon for [3+2] cycloaddition under gold catalysis to give fused [4.3.0] and [5.3.0] bicyclic derivatives and VDCP rearranged products in moderated to good yields under mild conditions. The substrate scope of these novel transformations has been explored and plausible reaction mechanisms have been presented on the basis of deuterium labeling experiments and DFT calculations.     

Study on the interaction between urea and cellulose by combining solid-state 13C CP/MAS NMR and extended Hückel charges

In this article, solid-state ¹³C CP/MAS NMR combined with extended Hückel charges was applied to investigate the interaction between urea and cellulose in the NaOH/urea aqueous solvent system. Direct experimental evidence was provided to support the interaction between urea and cellulose. The solid-state ¹³C CP/MAS NMR results revealed that complicated complexes are formed by urea, NaOH and cellulose in the solution. Excess urea exists in a free state, which explains why 7 wt% NaOH/12 wt% urea/81 wt% H₂O is the optimal ratio selection to dissolve cellulose. Based on the correlation in which the computed extended Hückel charge on carbon of urea is approximately inversely proportional to its ¹³C chemical shift, a possible interaction model of cellulose, NaOH and urea was proposed. Interactions exist between any two of urea, NaOH and cellulose, which results in the cellulose chain being surrounded by NaOH and urea molecules. NaOH and urea may be in the same surface layer of cellulose chains.     

Asymmetrically superhydrophobic cotton fabrics fabricated by mist polymerization of lauryl methacrylate

A graft-polymerization process with atomized lauryl methacrylate as monomer is used to fabricate fluorine-less and asymmetrically superhydrophobic cotton fabrics. The polymers synthesized in the process can form nanoscale hierarchical structures on the cotton surface, and the surface morphology can be controlled by choosing a suitable solvent or by varying the feeding quantity of the monomer mist stream. After applying the surface modification to cotton fabrics, an asymmetrically superhydrophobic surface is achieved without any additional nanosized particles, and the solvent damages on the cotton fabrics are controllable at a very low level. Surface characterization reveals that the modified side of the cotton fabric has laundering-durable and mechanically stable superhydrophobicity with a water contact angle of more than 150°, whereas the opposite inherits the hydrophilic property of pristine cotton fabric. The modified cotton fabrics are found to have medium-level water-absorbing ability between pristine cotton and PET fabrics, as well as good vapor transmissibility similar to pristine cotton fabric. These properties are of great significance in textile and medical applications.